Published by Summer Associates Tax Services, Stamford, Connecticut[email protected]
The Contractor’s Tax LetterTax planning for Connecticut contractors and trade business owners

Call our Stamford office(203) 327-4311

Home / Case studies

Case studies

Hypothetical examples of how each strategy can change the tax bill for contractors and trade businesses, shown before and after with 2026 federal and Connecticut figures.

Results at a glance

Settling a 1099 crew's status early could avoid $28,500 of employment tax

Hypothetical case study | Moving a six-person roofing crew from 1099s to payroll | Strategy: Get worker classification right

A hypothetical roofing company in Bridgeport, owned by one person, that has paid six helpers on Forms 1099 for the past three years.

The situation

Each helper earns $45,000 a year, or $270,000 for the crew. The helpers ride to jobs in the company's trucks, use its equipment, work set hours and have no other customers, so they would likely be employees under the IRS control test and under Connecticut's ABC test for unemployment tax. The company has filed every required Form 1099 and isn't under audit.

The approach

Before an injury or unemployment claim raises the question, the owner applies to the IRS Voluntary Classification Settlement Program (VCSP) on Form 8952 and moves the helpers to payroll. The program's payment is 10% of one year's employment tax figured at the reduced rates of Section 3509(a), about $2,900 here, with no interest or penalties, and the IRS agrees not to audit the helpers' classification for earlier years. The before column shows the likely cost of an IRS exam that reclassified the helpers instead. Because the company filed every Form 1099, the examiner has to offer the Classification Settlement Program (CSP). Its full offer is one year's employment tax at the same reduced rates, plus federal unemployment tax for that year.

Before and after

Most recent year of helper pay, IRS exam settled under CSP compared with VCSPBeforeAfter
Pay to six helpers in the most recent year$270,000$270,000
Employer Social Security and Medicare, 7.65%$20,700$0
Employee Social Security and Medicare at 20% of the 7.65% share$4,100$0
Income tax not withheld, at 1.5% of pay$4,100$0
Federal unemployment tax, 6% of the first $7,000 per helper$2,500$0
VCSP payment, 10% of the Section 3509(a) amount$0$2,900
Total federal employment tax$31,400$2,900

Federal employment tax avoided, if an IRS exam would have reclassified the crew and settled under CSP: $28,500

Trade-offs and limits

  • The saving is conditional. It assumes an IRS exam would have reclassified the helpers and the company would have accepted the full CSP offer. With a colorable argument for relief under Section 530 of the Revenue Act of 1978, the offer drops to 25% of the Social Security, Medicare and withholding amount, with federal unemployment tax still in full. That comes to about $9,700, and VCSP would save about $6,800. Without an exam the company would owe nothing for past years, but the exposure would keep growing each year the arrangement continued.
  • A CSP offer isn't a cap. If the company turned it down and the IRS assessed all three open years at the same rates, the federal amount would be about $94,100.
  • Payroll has its own cost. At 2026 rates, the employer's 7.65% share of Social Security and Medicare on $270,000 is about $20,700 a year, and Connecticut unemployment tax at the 1.9% new-employer rate on the first $27,000 of each helper's pay adds about $3,100. Federal unemployment tax and workers' compensation premiums come on top. These costs are deductible.
  • VCSP settles federal employment tax only. It doesn't bind the Connecticut Department of Labor, which can apply its own ABC test to past unemployment tax, and it doesn't resolve workers' compensation or wage claims.
  • The IRS says the application should be filed at least 120 days before the date the company wants to start treating the helpers as employees. A company under an IRS employment tax audit, or a Department of Labor or state audit of worker classification, can't use the program.
  • Once the helpers are employees, Connecticut's paid sick leave law reaches the company on January 1, 2027, and 0.5% CT Paid Leave contributions are withheld from their pay.
  • Penalties and interest that an exam could add, and professional fees, aren't included. Had the company not filed Forms 1099, neither program would be open to it, the 1.5% and 20% rates would double to 3% and 40%, and an exam could reach all three years, for about $118,600 including federal unemployment tax.

Assumptions

  • Six helpers paid $45,000 a year each, or $270,000 a year, all below the Social Security wage base. Both columns use the most recent year's pay.
  • Reduced rates under 26 U.S.C. 3509(a): the employer's full 7.65% share, 20% of the employee's 7.65% share, and 1.5% of pay for income tax that wasn't withheld, or 10.68% of pay in all. They apply because the company filed Forms 1099 and didn't intentionally disregard the withholding rules.
  • CSP terms from the Internal Revenue Manual (IRM 4.23.6): an examiner must offer CSP when every required Form 1099 was filed, the full offer is one year's employment tax at Section 3509(a) rates, and federal unemployment tax for that year is included in full in any offer.
  • VCSP terms from the IRS Voluntary Classification Settlement Program page and FAQs: 10% of the Section 3509(a) amount for the most recent tax year, with no federal unemployment tax, no interest or penalties, and no employment tax audit of the helpers' classification for prior years.
  • Federal unemployment tax is 6% of the first $7,000 of each helper's pay. No Connecticut unemployment tax was paid on the helpers, so no credit for it is assumed. Paying it later would earn back most of that credit (26 U.S.C. 3302).
  • Connecticut's 2026 unemployment tax wage base of $27,000 and new-employer rate of 1.9% (Connecticut Department of Labor).
  • Figures are rounded to the nearest $100, and each total is the sum of the rounded rows.

The people and numbers in this example are hypothetical. They apply 2026 federal and Connecticut tax rules to simplified facts, so a real return could come out differently, and professional fees aren't included.

A safe harbor 401(k) cut an HVAC owner's 2026 tax bill by $23,200

Hypothetical case study | Replacing a SIMPLE IRA with a safe harbor 401(k) | Strategy: Safe harbor 401(k) for owner and crew

A hypothetical HVAC company owner in Danbury, age 52 and married, whose S corporation has 10 employees and a SIMPLE IRA.

The situation

She pays herself a $150,000 salary, and her 10 employees earn $600,000 in total. After her salary and payroll taxes, the S corporation earns $300,000 before retirement plan contributions. Under the SIMPLE IRA she defers $18,100 plus a $3,850 catch-up, and the company matches 3% of pay for her and for every employee.

The approach

A safe harbor 401(k) with a 4% match and a profit-sharing layer lets her defer $24,500 plus an $8,000 catch-up and receive a $6,000 match and a $41,500 profit-sharing allocation, $80,000 in all. Weighting profit sharing toward the owner this way generally requires a profit-sharing contribution of at least 5% of pay for each employee on top of the match, so contributions for staff rise to 9% of pay. The before column is a full year of the SIMPLE IRA, and the after column is a full year of the 401(k).

Before and after

2026, married filing jointlyBeforeAfter
Owner's salary$150,000$150,000
Plan contributions for the owner$26,500$80,000
Plan contributions for staff$18,000$54,000
S corp income on the owner's Schedule K-1$277,500$198,500
Federal adjusted gross income$405,600$316,000
Federal income tax$61,500$43,800
Connecticut income tax$23,000$17,500
Total income tax$84,500$61,300

Reduction in 2026 federal and Connecticut income tax: $23,200

Trade-offs and limits

  • Most of the benefit is a deferral. Pre-tax contributions and their earnings are taxed as ordinary income when withdrawn.
  • Staff contributions rise by $36,000 a year in this example. That cost is deductible and is part of the lower tax shown, but it is cash the company pays out. The actual staff cost depends on plan design, employee ages and deferral rates, and nondiscrimination testing of the profit-sharing allocation. A design with a 3% nonelective safe harbor contribution instead of the match can cost less.
  • The pre-tax catch-up assumes her 2025 wages from the company were $150,000 or less. Above that, SECURE 2.0 requires 401(k) catch-up contributions to be Roth, with no current deduction.
  • A 401(k) costs more to run than a SIMPLE IRA, and those administration fees aren't included. Because the company already sponsors a SIMPLE IRA, the startup credit for new plans generally isn't available (26 U.S.C. 45E).
  • Timing is tight. A full year of the 401(k), as in the after column, means ending the SIMPLE IRA on December 31 and telling employees before November 2, when their election period for the next year begins (IRS SIMPLE IRA plan FAQs). So the switch has to be decided by November 1 of the year before. A mid-year change is allowed only to a safe harbor 401(k) that starts the day after the SIMPLE IRA ends, with 30 days' notice and that year's deferral limits prorated (IRS Notice 2024-2), so it gives less than the full-year figures shown. Safe harbor notices have their own deadlines.

Assumptions

  • Married filing jointly, standard deduction, no other income. Her spouse has no earnings.
  • She is 52, and her 2025 wages were $150,000, so her 401(k) catch-up can be pre-tax.
  • Every employee is assumed to defer enough to receive the full match under either plan. In the 401(k), each employee also receives a 5% profit-sharing contribution, the minimum allocation that the cross-testing rules generally require when the owner's profit-sharing rate is this much higher (Treas. Reg. §1.401(a)(4)-8(b)(1)(vi)). The safe harbor match doesn't count toward it.
  • Social Security and Medicare tax doesn't change, because elective deferrals are still subject to it.
  • The QBI deduction is 20% of her K-1 income, and her taxable income is below the $403,500 threshold, so the wage limit doesn't apply. Connecticut has no QBI deduction.
  • 2026 plan limits (IRS Notice 2025-67), federal brackets (Rev. Proc. 2025-32) and Connecticut rates, including the 2% phase-out and benefit recapture. Figures are rounded to the nearest $100.

This is an illustration, not a client result. It uses 2026 federal and Connecticut rules and simplified facts. Some strategies defer tax rather than eliminate it. Get advice for your own situation before acting.

A first SIMPLE IRA cut a mason's 2026 tax bill by $7,900

Hypothetical case study | A first SIMPLE IRA for a three-employee shop | Strategy: SIMPLE IRA as a low-cost starter plan

A hypothetical masonry contractor in Shelton, age 45 and married, who runs the business as a sole proprietor with three employees.

The situation

The business nets $180,000 on Schedule C before any retirement plan, and the three employees earn $60,000 each. The shop has never had a retirement plan, and the owner wants one that is cheap to run.

The approach

The owner sets up a SIMPLE IRA effective January 1, 2026, with a 3% match. He defers $18,100, the higher limit for employers with 25 or fewer employees, and his 3% match, figured on his net earnings from self-employment, is about $4,900. Because this is the shop's first plan, a SECURE 2.0 credit pays back the employer match for each employee, up to $1,000 each, or $3,000 here. The $3,000 the credit covers isn't deductible, so only $2,400 of the $5,400 staff match reduces Schedule C profit and with it self-employment tax. His own contributions are deducted on his Form 1040 and don't reduce self-employment tax.

Before and after

2026, married filing jointlyBeforeAfter
Schedule C profit$180,000$177,600
Owner's SIMPLE IRA contributions$0$23,000
Federal adjusted gross income$167,300$142,000
Self-employment tax$25,400$25,100
Federal income tax before the credit$13,200$10,000
Credit for the staff match$0-$3,000
Connecticut income tax$8,200$6,800
Total tax$46,800$38,900

Reduction in 2026 federal and Connecticut income and self-employment tax: $7,900

Trade-offs and limits

  • Most of the benefit is a deferral. SIMPLE IRA withdrawals are taxed as ordinary income federally. Connecticut may exempt them later, because from 2026 it subtracts 100% of IRA distributions when federal adjusted gross income is under $100,000 on a joint return, phasing out by $150,000.
  • The match for staff costs $5,400 a year if every employee defers at least 3%. In 2026 and 2027 the credit covers $3,000 of it, and that part isn't deductible. The credit drops to 75%, 50% and 25% of that amount in 2028 through 2030 and then ends, so the net cost of the match rises over time.
  • A separate startup credit pays back the fees to set up and run the plan, up to $750 a year here for 2026 through 2028. Those fees, and that credit, aren't included.
  • His own contributions reduce income tax but not self-employment tax, and they also reduce the QBI deduction, which the figures include.
  • A new SIMPLE IRA has to be set up by October 1 to apply to that year, so a shop without a plan today could start one for 2027 but not for 2026.
  • The SIMPLE limit caps what the owner can save. A shop whose profits grow can move to a safe harbor 401(k) later.

Assumptions

  • Married filing jointly, standard deduction, no other income. The owner is under 50, so no catch-up applies.
  • Each employee defers at least 3% of pay and receives the full match.
  • The employer contribution credit under 26 U.S.C. 45E(f) applies because the shop has 50 or fewer employees, had no retirement plan in the three prior years, and each employee's 2026 wages are under the $110,000 limit (IRS Notice 2025-67). It covers employer contributions, not elective deferrals, and only the three employees' match is counted. The part of the match equal to the credit isn't deductible (26 U.S.C. 45E(e)(2)(B)).
  • His match is 3% of net earnings from self-employment, which is 92.35% of Schedule C profit after the deductible part of the staff match.
  • The QBI deduction is figured after the self-employment tax deduction and his plan contributions (Treas. Reg. 1.199A-3(b)(1)(vi)) and is limited to 20% of taxable income. Connecticut has no QBI deduction.
  • 2026 federal brackets, self-employment tax with the $184,500 wage base, and Connecticut rates, including the 2% phase-out and benefit recapture.
  • Figures are rounded to the nearest $100.

Hypothetical example. The facts are simplified and the figures follow 2026 federal and Connecticut law. Actual savings vary with each taxpayer's circumstances and can differ from the amounts shown.

Two vans and a mini-excavator cut an electrical contractor's 2026 tax bill by $46,200

Hypothetical case study | Two vans and a mini-excavator placed in service in December | Strategy: Section 179 and bonus on trucks and tools

A hypothetical electrical contractor in Trumbull, an S corporation with one married owner, that needs two cargo vans and a mini-excavator.

The situation

The vans cost $62,000 each and the mini-excavator $85,000, or $209,000 in all. Both vans are rated over 6,000 lbs GVWR, have no seating behind the driver and are used only for work. The owner takes a $130,000 salary, and before the new equipment the company expects $420,000 of 2026 income on the owner's Schedule K-1.

The approach

If the equipment arrives in January 2027, it gives no 2026 deduction, which is the before column. Ordering early enough to place all three in service in December 2026 and electing Section 179 moves the full $209,000 deduction into 2026. Section 179 is used instead of bonus depreciation because Connecticut adds back only 80% of it, so $41,800 is deductible on the 2026 Connecticut return.

Before and after

2026, married filing jointlyBeforeAfter
Equipment deducted on the federal return$0$209,000
Federal adjusted gross income$550,000$341,000
Connecticut adjusted gross income$550,000$508,200
Federal income tax$91,700$49,200
Connecticut income tax$35,200$31,500
Total income tax$126,900$80,700

Reduction in 2026 federal and Connecticut income tax: $46,200

Trade-offs and limits

  • The benefit is mainly timing. Without the 2026 purchase, the same deduction would come in 2027. Expensing also leaves the equipment with no tax basis, so a later sale or trade-in produces ordinary income up to the amount deducted, and recapture also applies if a van's business use falls to 50% or less.
  • Connecticut adds back $167,200 in 2026 and lets the owner subtract $41,800 a year from 2027 through 2030. With 100% bonus depreciation instead, Connecticut would add back all $209,000 and the 2026 Connecticut tax would be about $3,600 higher. That Connecticut tax would then exceed the standard deduction, so the owner would itemize and federal tax would fall by about $700, leaving bonus about $2,900 more costly for 2026.
  • Section 179 is limited to business taxable income and can't create a loss, which isn't a constraint here. Bonus depreciation can be the better choice in a low-profit year.
  • Delivery decides the year. Equipment ordered in December but delivered in January is placed in service in 2027.
  • The mini-excavator goes on the company's personal property declaration to the town assessor for October 1, 2027, and the vans are taxed as registered vehicles. Those property taxes, and any financing costs, aren't included.

Assumptions

  • Married filing jointly, no income other than the salary and the S corporation. The only itemized deduction would be Connecticut income tax paid in 2026, within the SALT cap. It is less than the $32,200 standard deduction in both columns, so the owner takes the standard deduction.
  • The company's W-2 payroll is large enough that the QBI wage limit doesn't reduce the 20% deduction. The deduction falls with the lower K-1 income, which is included. Connecticut has no QBI deduction.
  • The 2026 Section 179 limit of $2,560,000 is well above these purchases (Rev. Proc. 2025-32).
  • Connecticut adds back 80% of Section 179 and subtracts 25% of the add-back in each of the next four years (CGS 12-701). There are no other Connecticut modifications.
  • No alternative minimum tax applies in either column.
  • 2026 federal brackets and Connecticut rates, including the 2% phase-out and benefit recapture. Figures are rounded to the nearest $100.

No real client is described here. The case applies 2026 federal and Connecticut tax rules to an invented set of facts to show how the strategy works, and results differ from one taxpayer to the next.

A $110,000 salary saved a plumbing owner $9,500 of 2026 tax, before S corp costs

Hypothetical case study | A $110,000 salary on $320,000 of plumbing profit | Strategy: S corp with a defensible salary

A hypothetical plumbing company in Stamford with one married owner and $600,000 of employee wages, comparing a sole proprietorship with an S corporation.

The situation

The business nets $320,000 before paying the owner. Run as a sole proprietorship, the whole profit is subject to self-employment tax, with the 12.4% Social Security portion stopping at the $184,500 wage base. The owner runs service calls, estimates jobs and manages the crew, and local wage data supports a $110,000 salary for that combined role.

The approach

As an S corporation, the company pays the owner a $110,000 salary through payroll, with 15.3% Social Security and Medicare tax on it, and the remaining profit passes through on Schedule K-1 without payroll tax. Payroll tax falls by about $15,100. A smaller QBI deduction and slightly higher adjusted gross income add about $5,600 of income tax, which leaves the net reduction below.

Before and after

2026, married filing jointlyBeforeAfter
Owner's salary$0$110,000
Business income on Schedule C or Schedule K-1$320,000$201,600
Federal adjusted gross income$304,300$311,600
Self-employment tax, or payroll tax on the salary$31,900$16,800
Federal income tax$37,400$42,600
Connecticut income tax$16,800$17,200
Total tax$86,100$76,600

Federal and Connecticut income and payroll tax saved for 2026, before added S corp costs: $9,500

Trade-offs and limits

  • The saving holds only if the salary is reasonable for the work. If the IRS found $110,000 too low, it could treat distributions as wages and assess payroll tax, penalties and interest.
  • Lower wages mean lower Social Security earnings, which can reduce future Social Security benefits.
  • An S corporation costs more to run. A separate federal and Connecticut return, payroll processing for the owner and unemployment tax on the salary aren't included.
  • Retirement plan contributions for an S corporation owner are based on W-2 salary, so a lower salary also limits them.
  • Connecticut has no QBI deduction, so its tax rises slightly with the higher adjusted gross income. An S corporation can also weigh Connecticut's optional pass-through entity tax, which the last case study on this page models.

Assumptions

  • Married filing jointly, standard deduction, no other income.
  • The S corporation deducts its 7.65% half of the payroll tax on the salary in arriving at K-1 income.
  • Self-employment tax is figured on 92.35% of profit, and the before column includes $400 of 0.9% Additional Medicare Tax above $250,000. The salary is too low for Additional Medicare Tax.
  • The QBI deduction is 20% of Schedule C profit less the self-employment tax deduction, or 20% of K-1 income, limited to 20% of taxable income before the deduction. That limit applies in the before column, and taxable income is below the $403,500 threshold in both. Connecticut has no QBI deduction.
  • 2026 federal brackets, Social Security wage base and Connecticut rates, including the 2% phase-out and benefit recapture. Figures are rounded to the nearest $100.

This case study is hypothetical. The client and the figures are illustrations based on 2026 federal and Connecticut tax rules, not an actual client's results, and your own results will depend on your facts.

Reporting overtime on the W-2 saves a technician $2,000 of federal tax

Hypothetical case study | Reporting overtime premium pay on the W-2 | Strategy: Overtime deduction reporting for your crew

A hypothetical mechanical contractor in Fairfield with 14 field technicians who regularly work more than 40 hours a week.

The situation

A typical technician earns $45 an hour for 2,080 regular hours and works 400 overtime hours at $67.50, for $120,600 of 2026 wages. The company's payroll system lumps all overtime pay together, so its 2026 W-2 would show no separate amount for the overtime premium. That W-2 wouldn't meet the new federal reporting rule.

The approach

For 2026, employers must report qualified overtime, the FLSA-required premium, in box 12 of the W-2 with code TT (26 U.S.C. 6051(a)(19)). The company sets up payroll to track the extra $22.50 an hour above the regular rate. For this technician that is $9,000. The deduction covers only qualified overtime included on the W-2 (26 U.S.C. 225(a)), so on a W-2 without it the technician has nothing to deduct. If all 14 technicians had the same pay and hours, their combined federal tax would fall by about $28,000.

Before and after

2026, one technician filing single, W-2 without and with the overtime amountBeforeAfter
Wages, including overtime$120,600$120,600
Overtime premium deducted on the federal return$0$9,000
Federal taxable income$104,500$95,500
Federal income tax$17,700$15,700
Connecticut income tax$6,300$6,300
Total income tax$24,000$22,000

Federal income tax saved by one technician for 2026: $2,000

Trade-offs and limits

  • Reporting isn't optional. A 2026 W-2 that leaves out the overtime amount can draw penalties of up to $340 for each form filed with the Social Security Administration and $340 for each copy furnished to the employee (26 U.S.C. 6721 and 6722, Rev. Proc. 2025-32), or up to about $9,500 for 14 technicians. Prompt correction lowers the penalty.
  • The company gets no tax deduction from the reporting. Overtime is still wages for Social Security, Medicare, unemployment tax and Connecticut withholding, and the payroll setup cost isn't included. The employee deduction can also help in recruiting and keeping technicians.
  • Connecticut doesn't allow the deduction. Its return starts from federal adjusted gross income, and the overtime deduction comes after that line, so the technician's Connecticut tax is unchanged.
  • Only the FLSA-required half-time premium counts. Extra premiums under union or prevailing-wage agreements and weekend differentials don't qualify, and salaried employees exempt from FLSA overtime get no deduction.
  • The deduction is capped at $12,500, or $25,000 on a joint return, and phases out above $150,000 of modified adjusted gross income, or $300,000 joint.
  • It runs from 2025 through 2028 under current law.

Assumptions

  • Single, standard deduction, no income other than wages.
  • All 400 overtime hours are FLSA overtime over 40 hours a week, and the regular rate is the $45 hourly wage.
  • Under 26 U.S.C. 225(a), the deduction applies only to qualified overtime included on the W-2, or on Form 1099 for a nonemployee. This technician's income is below the phase-out.
  • 2026 federal brackets and Connecticut rates, including the 2% phase-out and benefit recapture.
  • Figures are rounded to the nearest $100.

The people and numbers in this example are hypothetical. They apply 2026 federal and Connecticut tax rules to simplified facts, so a real return could come out differently, and professional fees aren't included.

Completed-contract reporting saved a home builder $60,900 of 2026 tax

Hypothetical case study | Completed-contract reporting for two custom homes | Strategy: Small contractor accounting methods

A hypothetical custom home builder in Easton, an S corporation with one married owner and about $9 million of average annual gross receipts.

The situation

In 2026 the company signed contracts to build two single-family homes for $2.4 million in total, with estimated costs of $2 million. By December 31 the homes are half finished, and both should be done by mid-2027. The company has always reported its contracts for tax on the percentage-of-completion method, which puts half of the $400,000 expected gross profit, or $200,000, into 2026.

The approach

Home construction contracts, and other contracts of a contractor under the $32 million gross receipts test that should finish within two years, are exempt from the percentage-of-completion method. The company files Form 3115 with its 2026 return to change to the completed-contract method for contracts entered into from 2026 on. Income and costs on the two homes are then reported in 2027, when they are finished, so the $200,000 of gross profit moves out of 2026.

Before and after

2026, married filing jointlyBeforeAfter
Gross profit reported on the two homes$200,000$0
Federal adjusted gross income$600,000$400,000
Federal income tax$103,900$60,000
Connecticut income tax$39,500$22,500
Total income tax$143,400$82,500

Federal and Connecticut income tax deferred from 2026 to 2027: $60,900

Trade-offs and limits

  • This is a deferral. All $400,000 of gross profit on the two homes is taxed in 2027, so 2027 income will be higher, and bunching it into one year could push some of it into a higher bracket. The deferral continues only while each year-end backlog of open contracts stays at least as large.
  • The change is automatic and made on a cut-off basis under section 19.03 of Rev. Proc. 2025-23, added by section 4.02 of Rev. Proc. 2026-32, which covers residential construction contracts entered into in tax years beginning after July 4, 2025. It applies only to contracts entered into on or after January 1, 2026, the first day of the year of change, so contracts already under way stay on the old method.
  • A loss on a contract is also deferred until the contract is finished.
  • Commercial contracts are treated differently for the alternative minimum tax, which still requires the percentage-of-completion method on them. Had these been commercial jobs, the AMT would have made the owner's 2026 federal tax about $4,300 higher than staying on the percentage-of-completion method, though the AMT paid would come back in later years as a minimum tax credit. Home construction contracts, like other residential construction contracts, are exempt from that rule (26 U.S.C. 56(a)(3)).
  • Connecticut follows the federal method here, so it defers the same income. Lenders and sureties may still want financial statements on the percentage-of-completion method, and the cost of preparing Form 3115 isn't included.

Assumptions

  • Married filing jointly, standard deduction, no income other than the owner's $120,000 salary and the S corporation.
  • Apart from the two homes, the company's 2026 income on the owner's K-1 is $280,000. Under the percentage-of-completion method, 50% of the estimated costs are incurred by year-end, so 50% of the gross profit is reported.
  • The company meets the 2026 gross receipts test of $32 million (Rev. Proc. 2025-32), and the contracts are home construction contracts under 26 U.S.C. 460(e).
  • The company's W-2 payroll is large enough that the QBI wage limit doesn't reduce the 20% deduction. No alternative minimum tax applies in either column.
  • 2026 federal brackets and Connecticut rates, including the 2% phase-out and benefit recapture. Figures are rounded to the nearest $100.

This is an illustration, not a client result. It uses 2026 federal and Connecticut rules and simplified facts. Some strategies defer tax rather than eliminate it. Get advice for your own situation before acting.

Electing Connecticut's PET saved an HVAC owner $7,700 in 2026, net of the PET

Hypothetical case study | Electing Connecticut's pass-through entity tax | Strategy: Plan around Connecticut's contractor rules

A hypothetical HVAC company in Norwalk, an S corporation with eight technicians and one married owner, that does all of its work in Connecticut.

The situation

The owner takes a $150,000 salary, and the company earns $500,000 after that salary, with no Connecticut adjustments such as bonus depreciation add-backs. The owner has no mortgage and few itemized deductions. At this income the federal SALT cap is at its $10,000 floor, so the owner takes the standard deduction and gets no federal deduction for Connecticut income tax.

The approach

The company elects the pass-through entity tax (PET) on its 2026 Connecticut return and pays 6.99% of its $500,000 of income, about $35,000, during 2026. Because the S corporation deducts the PET on its federal return, it falls outside the SALT cap and lowers the owner's K-1 income and federal and Connecticut adjusted gross income. On the Connecticut return, the owner then claims a refundable credit for 87.5% of the PET.

Before and after

2026, married filing jointlyBeforeAfter
Owner's salary$150,000$150,000
S corp income before the PET$500,000$500,000
Federal adjusted gross income$650,000$615,100
Federal income tax$118,800$109,700
Connecticut income tax before the PET credit$43,900$40,900
PET paid by the S corp, 6.99%$0$35,000
PET credit, 87.5% of the PET$0-$30,600
Total income tax, including the PET$162,700$155,000

Federal and Connecticut income tax saved for 2026, net of the PET: $7,700

Trade-offs and limits

  • Electing is an annual, irrevocable choice. It is made on a timely filed Form CT-1065/CT-1120SI, including an extended return, and never on an amended one.
  • Only 87.5% of the PET is credited, so about $4,400 isn't. The lower Connecticut adjusted gross income recovers part of that.
  • Most of the saving depends on the SALT cap. An owner with lower income who itemizes and has room under the $40,400 cap would gain less.
  • Because the PET deduction lowers business income, it also trims the QBI deduction, which the figures include.
  • Timing matters for the federal deduction, which falls in the year the S corporation pays the PET. A final 2026 installment paid in January 2027 would be deducted in 2027.
  • If the company expenses trucks or equipment, Connecticut's bonus and Section 179 add-backs raise the PET base too, as the Connecticut contractor guide shows.

Assumptions

  • Married filing jointly, standard deduction, no income other than the salary and the S corporation. With adjusted gross income above about $606,000, the SALT cap is $10,000 in both columns, and itemizing would be worth less than the $32,200 standard deduction.
  • The S corporation pays the full 2026 PET by December 31, 2026, so the federal deduction falls in 2026 (IRS Notice 2020-75).
  • PET of 6.99% with an 87.5% refundable credit, and owners don't add the PET back on the Connecticut return (CGS 12-699, Connecticut DRS).
  • The company's W-2 payroll is large enough that the QBI wage limit doesn't reduce the 20% deduction. No alternative minimum tax applies in either column.
  • 2026 federal brackets, the 2026 SALT cap of $40,400 reduced by 30% of income over $505,000 to a $10,000 floor, and Connecticut rates, including the 2% phase-out and benefit recapture. Figures are rounded to the nearest $100.

Hypothetical example. The facts are simplified and the figures follow 2026 federal and Connecticut law. Actual savings vary with each taxpayer's circumstances and can differ from the amounts shown.

Find out what your shop could be deducting this year.

In a consultation, we look at your payroll and planned truck and equipment purchases, estimate what a retirement plan or S corp salary could be worth, and tell you whether any of your 1099 workers look like employees.

(203) 327-4311

Request a free consultation

The first consultation is free, with no obligation.

Call (203) 327-4311Free consultation